Start
|
Browse by Day
|
Author Index
|
Personal Scheduler
Author Index:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
Agulló, N.
Nano ZnO As Activator of Rubber Vulcanization. Is Only a Matter of Size?
Use of Different Inorganic Activators As Alternative to ZnO in Natural Rubber Vulcanization
Akutagawa, K.
Nano-Architecture Design for Tire Materials
Alshuth, T.
CANCELLED: Lifetime prediction of elastomers - A unification of the fracture mechanics and the (Wöhler) s-n-concept
Altomare, M.
Nano ZnO As Activator of Rubber Vulcanization. Is Only a Matter of Size?
Amnuaypornsri, S.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Aniunoh, K.
Experimental Evaluation of Rubber Properties
Anthony, G.
Improved Medical Stopper Solutions with High Performance, Anionic Isoprene Rubber
Aoyagi, Y.
The Influence of Humidity On Ozonolysis of Polybutadiene
Aredes, F.
Nitrile Rubber Life Cycle Study
Arghir, M.
Influence of Low Temperature Exposure On Tire Vibration and Tire Brittleness for High Performance Tires
Correlations Between Lateral Forces Variation and Tire Wear
Radial ROAD FORCE Variation Influence On Tire Vibration
Arigo, M.
Silica Masterbatch SBR for Improved Dispersion and Processibility
Athawale, A.
Synthesis and Characterization of Electrically Conductive Silicone Rubber – TiB2 Composites
B
Bacher, B.
Thermal Analytical Techniques Applied to Formula Investigation of Rubber Products
Barkakaty, B.
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Barretti, M.
The Creation & Management of Knowledge (In the Rubber Industry)
KEYNOTE SPEAKER ADDRESS: The Creation & Management of Knowledge in the Rubber Compounding Industry
Barry, C. F.
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Effects of Nanocellulosics within Rubber Composites as a Mechanical and Rheological Modifier
Beek, W. J. E.
Application of Peroxides for the Production of Thermoplastic Vulcanisates
Benarous, A.
Water Based Bonding Agents for Rubber to Metal Bonding
Bennett, A.
Application of Peroxides for the Production of Thermoplastic Vulcanisates
Bernstein, R.
Fluorocarbon O-Ring Aging Studies; An Initial Look
Bhowmick, A.
Polydimethylsiloxane Nanocomposites with Various Organic and Inorganic Fibrous Nanofillers : Morphology-Property Correlation
Biben, T.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Blackburn, K.
Prediction of the Hysteresis and Creep Energy Loss with FEA within Filled Rubber Materials As Applied to Power Transmission Components
Borrós, S.
Nano ZnO As Activator of Rubber Vulcanization. Is Only a Matter of Size?
Use of Different Inorganic Activators As Alternative to ZnO in Natural Rubber Vulcanization
Borzi, B.
Creating a Green EPDM Compound
Braum, M.
Reactive Mixing As a Way of Grafting Onto Silica Surface with Epoxidized Polymers
Brighton, J.
Prediction of the Hysteresis and Creep Energy Loss with FEA within Filled Rubber Materials As Applied to Power Transmission Components
Brown, P.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
Burger, C.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
Burghardt, S.
Prediction of the Hysteresis and Creep Energy Loss with FEA within Filled Rubber Materials As Applied to Power Transmission Components
Busfield, J.
Linear-Viscoelastic Energy Dissipation At the Filler-Matrix Interface in Silica-Rubber Composites
C
Cameron, P.
A New Way of Thinking about the Fillers Role in Natural Rubber: Improving Hysteresis Through Filler Modifications and Smart Compounding
Candau, N.
Impact of High Strain Rate Cycles On the Strain Induced Crystalline Properties of Natural Rubber
Cannon, A.
Extrusion of Low Friction and Low Stiction Microstructured Surfaces On Silicone Rubber
Carney, B.
New NBR/HNBR Adhesives for Oil/Gas Drilling Applications
Carreau, P. J.
Rheospectris: A New Instrument for Hyper-Frequency Viscoelastic Spectroscopy of Elastomers for R&D and QC
Caruthers, J.
Necking in Silica Filled Poly(dimethyl siloxane) and the Resulting Mechanical Properties of the Necked Material
Cassell, R. A.
Megum5386 - Anew, Highly Reactive Cover II for Bonding Elastomers to Solid Substrates Under Vulcanization Conditions
Chapman, A. V.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
NOVOR 800 – A New Heat-Resistant Vulcanizing System
Chazeau, L.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Impact of High Strain Rate Cycles On the Strain Induced Crystalline Properties of Natural Rubber
Che, J.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Chenal, J. M.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Impact of High Strain Rate Cycles On the Strain Induced Crystalline Properties of Natural Rubber
Chiang, C. C. K.
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Chogule, H.
Orientational Effects and Polymer-Filler Interaction in CNT-Rubber Nanocomposites
Choi, J.
Natural Rubber/Carbon Black Nanocomposites Prepared by Ultrasonically Aided Extrusion
Chuanqing, L.
CANCELLED: Application of Neodymium Isoprene Rubber in Tread of Truck Tire
Cipolletti, V.
Layered Nanofillers for Rubbers
Coatney, M.
Numerical Analysis of Inflatable Structures with Application to Unmanned Aerial Vehicles (UAVs)
Cole, E.
Rocks to Rubber: Origin of the Fluoroelastomer Species
Comeau, B.
High Performance BRs for Golf Balls
Comparelli, R.
Nano ZnO As Activator of Rubber Vulcanization. Is Only a Matter of Size?
Constantinou, J.
Effects of Nanocellulosics within Rubber Composites as a Mechanical and Rheological Modifier
Conzatti, L.
Layered Nanofillers for Rubbers
Cook, S.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
NOVOR 800 – A New Heat-Resistant Vulcanizing System
Coombs, M.
Layered Nanofillers for Rubbers
Cormier, J. G.
Service Life Determination of Nitrile O-RINGS in Hydraulic FLUID
Cornish, K.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Type I & Type IV Circumallergenic Natural Rubber Latex Thin Films
Coverley, R.
Creating Superior Fatigue and Abrasion Resistant Rubber Compounds Through Liquid Phase Mixing
D
Das, A.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Debnath, S.
Silica Masterbatch SBR for Improved Dispersion and Processibility
Deffieux, A.
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Dick, J. S.
Cure Kinetics and Variable Temperature Analysis Methodologies for Solving Factory Problems
Dierkes, W. K.
Comparative Investigation of the Devulcanization Parameters of Tire Rubbers
Reinforcement of Natural Rubber by Precipitated Silica: The Influence of Processing Temperature
Dobel, T.
AEM Polymer for Seals and Gaskets with Low Oil Swell and Improved Processing
Douglas, J. E.
High Performance BRs for Golf Balls
Drab, J.
Failure Analysis Techniques for Rubber-to-Substrate Bonding
F
Fang, L.
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Fayman, Y.
Determining Fluoroelastomer Content of Rubbers Using Thermal Degradation and Spectroscopic Methods of Analysis
Feke, D.
Thermogravimetric Analysis of the Kinetics of the Reaction of Alkoxysilane with Silica
Fleck, F.
Effect of Filler Surface Activity and Morphology On Mechanical and Dielectric Proper-Ties of NBR / Graphene - Nano - Composites
Fletcher, A.
Current and Future Aerospace and Elastomer Needs
Ford, V.
Walking Into the Future On Rubber
Fraser, F.
Applications of Imaging ATR to Rubber Analysis
Fukasawa, K.
The Influence of Humidity On Ozonolysis of Polybutadiene
G
Galimberti, M.
Layered Nanofillers for Rubbers
Gauthier, C.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Impact of High Strain Rate Cycles On the Strain Induced Crystalline Properties of Natural Rubber
Gergely, A.
A New Polyisobutylene Based Thermoplastic Elastomer
Giannini, L.
Layered Nanofillers for Rubbers
Govindarajan, S.
A New Nonlinear Viscoelastic Model for Polymers
Gozen, A. O.
Taraxacum Kok-Saghyz (Russian Dandelion): An Alternative to Hevea Natural Rubber
Grant, C.
FKM & AEM Hose Constructions for Charged Air Cooler Applications
Grellmann, W.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Gross, T.
High Performance BRs for Golf Balls
Guerra, G.
Layered Nanofillers for Rubbers
Gurvich, M.
Engineering Mechanics of Elastomeric Composites: General Framework for Efficient Computational Implementation
Guzmán, M.
Nano ZnO As Activator of Rubber Vulcanization. Is Only a Matter of Size?
Use of Different Inorganic Activators As Alternative to ZnO in Natural Rubber Vulcanization
H
Hadj Henni, A.
Rheospectris: A New Instrument for Hyper-Frequency Viscoelastic Spectroscopy of Elastomers for R&D and QC
Halladay, J. R.
New NBR/HNBR Adhesives for Oil/Gas Drilling Applications
Soybean Oil Plasticizers As Replacement of Petroleum Oil In Rubber
Hamilton, R. G.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Hardy, D.
High Performance BRs for Golf Balls
Harris, J.
Influence of Friction On the Fatigue Crack Growth of Components Under High Compression
Harris, L.
Introducing Nicryl(TM) NBR, a Review of Compounding Nitrile Rubber and the Performance of Their Vulcanizates
Hein, M.
Improved Medical Stopper Solutions with High Performance, Anionic Isoprene Rubber
Heinrich, G.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Henderson, P.
Improved Medical Stopper Solutions with High Performance, Anionic Isoprene Rubber
Heuzey, M. C.
Rheospectris: A New Instrument for Hyper-Frequency Viscoelastic Spectroscopy of Elastomers for R&D and QC
Hoffman, R.
The Effect of Deformation Mode in the Prediction of Tire Performance by Dynamic Mechanical Analysis
Hong, Y. J.
Development of Recyclable Elastomer Composite
Honold, M.
Advanced Methodologies for Close-to-Reality Lab Scale Compatibility Assessment of Sealing Materials and Biofuels
Hsiao, B. S.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Huang, K.
Decrosslinking of Crosslinked High Density Polyethylene Via Ultrasonic Assisted Extrusion
Huneau, B.
In-Situ Synchrotron Waxd Investigation of the Crystallized Zone At a Fatigue Crack Tip in Natural Rubber
Hurtado, J.
A New Nonlinear Viscoelastic Model for Polymers
I
Ionescu, M.
Soybean Oil Plasticizers As Replacement of Petroleum Oil In Rubber
Isayev, A.
Effect of Particle Size On Ultrasonic Devulcanization of Tire Rubber Using Twin-Screw Extruder
Natural Rubber/Carbon Black Nanocomposites Prepared by Ultrasonically Aided Extrusion
Ultrasonic Twin-Screw Extruder for Rubber Devulcanization
Decrosslinking of Crosslinked High Density Polyethylene Via Ultrasonic Assisted Extrusion
Isono, Y.
Filler Network Analysis
J
J.Maria, H.
CANCELLED: Stress Relaxation Behavior of Natural Rubber (NR)/Nitrile Rubber (NBR) Blend Nanocomposites
Jablonowski, T.
Millathane® HS11, a New Millable Polyurethane Rubber
Jacob, S.
New EPDM Grades with Improved Processing Characteristics for Automotive Weatherseal Applications
Jacobi, M.
Reactive Mixing As a Way of Grafting Onto Silica Surface with Epoxidized Polymers
Jacobsson, M.
A New Way of Thinking about the Fillers Role in Natural Rubber: Improving Hysteresis Through Filler Modifications and Smart Compounding
Jeong, K. M.
Development of Recyclable Elastomer Composite
Jian, R.
SBR/Carbon Nanotube Nanocompsites Using Polystyrene Coated Carbon Nanotubes As A Master Batch
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Jiangwei, Z.
CANCELLED: Application of Neodymium Isoprene Rubber in Tread of Truck Tire
Jie, Z.
CANCELLED: Application of Neodymium Isoprene Rubber in Tread of Truck Tire
Jinmei, T.
CANCELLED: Application of Neodymium Isoprene Rubber in Tread of Truck Tire
Jorkasky, R. II
Advances in Rubber Mixing Technology
Joshi, A.
Synthesis and Characterization of Electrically Conductive Silicone Rubber – TiB2 Composites
Joshi, M.
Synthesis and Characterization of Electrically Conductive Silicone Rubber – TiB2 Composites
Joshi, M.
New EPDM Grades with Improved Processing Characteristics for Automotive Weatherseal Applications
Jourdain, E.
New EPDM Grades with Improved Processing Characteristics for Automotive Weatherseal Applications
K
Karam, A.
Butadiene Availability: Forecast of the Supply / Demand Balance and Impact On Synthetic Rubber
Kawai, T.
Development of Modified Solution SBR for the Reduction of Rolling Resistance of Tire
Kelley, J. R.
An Advanced Alternative to Ethylene Acrylic (AEM) Elastomers for High-Temperature, Oil Resistant Hoses
Kepas-Suwara, A.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
Kikuchi, H.
The Influence of Humidity On Ozonolysis of Polybutadiene
Kim, J. K.
Development of Recyclable Elastomer Composite
King, W.
Extrusion of Low Friction and Low Stiction Microstructured Surfaces On Silicone Rubber
Kleinhenz, M. D.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Kloppenburg, H.
High Performance BRs for Golf Balls
Klüppel, M.
Effect of Filler Surface Activity and Morphology On Mechanical and Dielectric Proper-Ties of NBR / Graphene - Nano - Composites
Kohli, T. S.
Carbon Footprint Comparison of Aqueous and Solvent Adhesive Systems Used in Rubber to Substrate Bonding
Korhan-Taymaz, K.
Service Life Determination of Nitrile O-RINGS in Hydraulic FLUID
Kostyal, D.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Krishnan, S.
CANCELLED: A Process for Preparation of Carbon Black /Silica/ Nanoclay Masterbatches From Fresh Natural Rubber Latex
Kumar, V.
Layered Nanofillers for Rubbers
L
Laghmach, R.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Lambrinos, K.
Low Unsaturation Butyl Polymer for Curing Bladder
Lapczyk, I.
A New Nonlinear Viscoelastic Model for Polymers
Law, Y. Y.
Thermogravimetric Analysis of the Kinetics of the Reaction of Alkoxysilane with Silica
Lee, D.
Applications of Imaging ATR to Rubber Analysis
Leu, A.
Influence of Low Temperature Exposure On Tire Vibration and Tire Brittleness for High Performance Tires
Correlations Between Lateral Forces Variation and Tire Wear
Radial ROAD FORCE Variation Influence On Tire Vibration
Lewis, J.
The Effect of Deformation Mode in the Prediction of Tire Performance by Dynamic Mechanical Analysis
Li, S.
Synthesis and Mechanical Properties of Magadiite/SBR Composites
Li, X.
Stochastic Three-Dimensional Numerical Simulations On the Hyperelastic Behavior of Particle Filled Rubbers Under Moderate Finite Deformation
Li, Z.
Stochastic Three-Dimensional Numerical Simulations On the Hyperelastic Behavior of Particle Filled Rubbers Under Moderate Finite Deformation
Liang, T.
Effect of Particle Size On Ultrasonic Devulcanization of Tire Rubber Using Twin-Screw Extruder
Ultrasonic Twin-Screw Extruder for Rubber Devulcanization
Luo, X.
Organically Functionalized Layered Double Hydroxides (LDHs) As Novel Barrier Additives for Rubbers
M
Ma, H.
Synthesis of High 1,2-Microstructure POLY(1,3-BUTADIENE) Using a Biobased Lewis Base
Manas-Zloczower, I.
Thermogravimetric Analysis of the Kinetics of the Reaction of Alkoxysilane with Silica
Mars, W.
Critical Plane Analysis of Fatigue Crack Nucleation Under Tension, Shear, and Compression
Martens, J.
The Effect of Deformation Mode in the Prediction of Tire Performance by Dynamic Mechanical Analysis
Martin, P.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
Mauro, M.
Layered Nanofillers for Rubbers
McBride, E.
FKM & AEM Hose Constructions for Charged Air Cooler Applications
AEM Polymer for Seals and Gaskets with Low Oil Swell and Improved Processing
Mead, J.
Study of Parcial Replacing Carbon Nanotubes in Conventionalcarbon BLACK/NBR Nanocomposites
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Mead, J. L.
SBR/Carbon Nanotube Nanocompsites Using Polystyrene Coated Carbon Nanotubes As A Master Batch
Effects of Nanocellulosics within Rubber Composites as a Mechanical and Rheological Modifier
Medvedev, G.
Necking in Silica Filled Poly(dimethyl siloxane) and the Resulting Mechanical Properties of the Necked Material
Meli, G.
Talc for Peroxide Cured Compounds
Michel, F. C. Jr.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Milic, J.
Soybean Oil Plasticizers As Replacement of Petroleum Oil In Rubber
Mirza, S.
Influence of Friction On the Fatigue Crack Growth of Components Under High Compression
Mitchell, K.
Bio-SIM "New Sources of Isoprene for the Synthetic Rubber Market
Monte, S.
Titanates and Zirconates–Different Than Silanes and Why That Matters to Rubber Compounders
Monthey, S.
Using Short Fiber Reinforcement As a Cost Effective Enhancement of Product Performance in A Variety of Applications
Moore, M.
Humidity and Rubber-to-Metal Bonding with Silane Adhesives
Moraes, J.
Nitrile Rubber Life Cycle Study
Morris, M. D.
Creating Superior Fatigue and Abrasion Resistant Rubber Compounds Through Liquid Phase Mixing
Mott, P.
High Strain Rate Mechanical Behavior of Polyurea As a Function of Stoichiometry
Möwes, M.
Effect of Filler Surface Activity and Morphology On Mechanical and Dielectric Proper-Ties of NBR / Graphene - Nano - Composites
Munch, E.
Phase-Field Modeling of Strain-Induced Crystallization of Elastomer
Impact of High Strain Rate Cycles On the Strain Induced Crystalline Properties of Natural Rubber
Myers, M.
Carbon Footprint Comparison of Aqueous and Solvent Adhesive Systems Used in Rubber to Substrate Bonding
N
Napier, R. C.
Effect of Cured Liner Gauge On Tire Performance
Nasreddine, V.
Mechanical and Aging Properties of Ultra-High Acn HNBR Elastomers
Neilsen, J.
A New Way of Thinking about the Fillers Role in Natural Rubber: Improving Hysteresis Through Filler Modifications and Smart Compounding
Neuhann, T.
Applications of Imaging ATR to Rubber Analysis
Newby, B.
Bungee Cord Design and Simulation for Field Tests
Nienaber, J. M.
Zinc Dithiophoshpates Applications in Sulfur Cured Polymers
Nikiel, L.
A New Way of Thinking about the Fillers Role in Natural Rubber: Improving Hysteresis Through Filler Modifications and Smart Compounding
Nimpaiboon, A.
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Noel, O. F. III
Talc for Peroxide Cured Compounds
Noordermeer, J. W. M.
Adhesion of Short and Continuous RFL-Treated Aramid Fibers to Sulfur and Peroxide Cured Rubbers
Comparative Investigation of the Devulcanization Parameters of Tire Rubbers
Reinforcement of Natural Rubber by Precipitated Silica: The Influence of Processing Temperature
Norton, E.
Cure Kinetics and Variable Temperature Analysis Methodologies for Solving Factory Problems
Nugent, K.
High Strain Rate Mechanical Behavior of Polyurea As a Function of Stoichiometry
O
O'Rourke, S.
Renewable and Sustainable Esters for Elastomers
Ogebule, O.
Necking in Silica Filled Poly(dimethyl siloxane) and the Resulting Mechanical Properties of the Necked Material
Ohlemacher, C. J.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Ohm, B.
Introducing Nicryl(TM) NBR, a Review of Compounding Nitrile Rubber and the Performance of Their Vulcanizates
Olsen, A.
A Method of Using the Normal Distribution to Model Rubber MDR Cure
Determining Fluoroelastomer Content of Rubbers Using Thermal Degradation and Spectroscopic Methods of Analysis
Oumohand, M.
Dynamic Compressive Response and Material Characteristics of a Foam EPDM Seal and Its Effect On Vehicle Door Closure
Oyer, U.
Humidity and Rubber-to-Metal Bonding with Silane Adhesives
P
Papp, F.
Advances in Micronized Rubber Powder Technology
Park, D. K.
Development of Recyclable Elastomer Composite
Pasetto, P.
Natural Rubber: An Old Material for New Applications
Patel, J.
The Creation & Management of Knowledge (In the Rubber Industry)
KEYNOTE SPEAKER ADDRESS: The Creation & Management of Knowledge in the Rubber Compounding Industry
Patel, J.
Green Tire Tread Compounds Based on Silica-reinforced Epoxidized Natural Rubber (ENR): Comparison of the Role of Water in the Cure of ENR, sSBR/BR, NR and BR
Patton, M.
Silica Masterbatch SBR for Improved Dispersion and Processibility
Pazur, R.
Service Life Determination of Nitrile O-RINGS in Hydraulic FLUID
The Effect of Deformation Mode in the Prediction of Tire Performance by Dynamic Mechanical Analysis
Peruch, F.
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Petrovic, Z.
Soybean Oil Plasticizers As Replacement of Petroleum Oil In Rubber
Pillai, C. R.
Recycled Polymer Composite Asphalt Additive
Ploehn, H.
Synthesis and Mechanical Properties of Magadiite/SBR Composites
Prakash, A.
Creating Superior Fatigue and Abrasion Resistant Rubber Compounds Through Liquid Phase Mixing
Puhala, A.
Organically Functionalized Layered Double Hydroxides (LDHs) As Novel Barrier Additives for Rubbers
Puskas, J.
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
A New Polyisobutylene Based Thermoplastic Elastomer
Q
Qiu, Z.
Keltan® ECO 5470 for Thermoplastic Vulcanizate Application
Quirk, R. P.
Synthesis of High 1,2-Microstructure POLY(1,3-BUTADIENE) Using a Biobased Lewis Base
R
Rabenhorst, R.
Butadiene Availability: Forecast of the Supply / Demand Balance and Impact On Synthetic Rubber
Rademakers, G.
Keltan® ECO 5470 for Thermoplastic Vulcanizate Application
Randall, A.
Taraxacum Kok-Saghyz (Russian Dandelion): An Alternative to Hevea Natural Rubber
Reincke, K.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Riga, A.
Thermal Analytical Techniques Applied to Formula Investigation of Rubber Products
Robin, S.
CANCELLED: Lifetime prediction of elastomers - A unification of the fracture mechanics and the (Wöhler) s-n-concept
Roland, C. M.
High Strain Rate Mechanical Behavior of Polyurea As a Function of Stoichiometry
Rong, L.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Rooj, S.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Rouckhout, D.
Effect of Cured Liner Gauge On Tire Performance
ROY, N.
Polydimethylsiloxane Nanocomposites with Various Organic and Inorganic Fibrous Nanofillers : Morphology-Property Correlation
Rublon, P.
In-Situ Synchrotron Waxd Investigation of the Crystallized Zone At a Fatigue Crack Tip in Natural Rubber
S
Saiwari, S.
Comparative Investigation of the Devulcanization Parameters of Tire Rubbers
Sakdapipanich, J.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Sarkawi, S. S.
Reinforcement of Natural Rubber by Precipitated Silica: The Influence of Processing Temperature
Sawyer, P.
Fluorocarbon O-Ring Aging Studies; An Initial Look
Schmitt, C.
Rheospectris: A New Instrument for Hyper-Frequency Viscoelastic Spectroscopy of Elastomers for R&D and QC
Schuster, R. H.
Orientational Effects and Polymer-Filler Interaction in CNT-Rubber Nanocomposites
Shekleton, L.
Measuring the Compatibility of Petroleum-Based Hydrocarbon Resins in Elastomers
Shimizu, R.
Nitrile Rubber Life Cycle Study
Shintani, D.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Shirazi, M.
Adhesion of Short and Continuous RFL-Treated Aramid Fibers to Sulfur and Peroxide Cured Rubbers
Shyu, G. D.
A Study On Viscoelasticity and the Mullins Effect of Elastomers
Slutzky, J. L.
Type I & Type IV Circumallergenic Natural Rubber Latex Thin Films
Smith, R.
Dynamic Behavior of Presssure Loaded Metal-Rubber Laminate Bellows Structures
Sommier, E.
CANCELLED: Influence of Manufacturing Parameters On the Properties of Elastomeric Vibration Isolators
Spijkerman, G.
Application of Peroxides for the Production of Thermoplastic Vulcanisates
Spiller, G.
NOVOR 800 – A New Heat-Resistant Vulcanizing System
Stocek, R.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Stoeckelhuber, K. W.
A Novel Approach towards Highly Exfoliated Natural Rubber-Clay Composites: Preparation and Characterization
Stuart, J.
Linear-Viscoelastic Energy Dissipation At the Filler-Matrix Interface in Silica-Rubber Composites
T
Talma, A. G.
Adhesion of Short and Continuous RFL-Treated Aramid Fibers to Sulfur and Peroxide Cured Rubbers
Tang, S.
The Relationship of Molecular Parameters of EPDM Polymers and the Properties of EPDM Compounds for Specific Applications
Taylor, D.
Keltan® ECO 5470 for Thermoplastic Vulcanizate Application
Terrill, E.
Evaluation of Aged Tires with Innerliners Containing Varying Halobutyl Levels
The Effect of Deformation Mode in the Prediction of Tire Performance by Dynamic Mechanical Analysis
Thomas, A.
Linear-Viscoelastic Energy Dissipation At the Filler-Matrix Interface in Silica-Rubber Composites
Thomas, S.
CANCELLED: Stress Relaxation Behavior of Natural Rubber (NR)/Nitrile Rubber (NBR) Blend Nanocomposites
Toki, S.
Two-Dimensional Wide-Angle X-Ray Diffraction Simulation Study On Strain-Induced Crystallization and Temperature-Induced Crystallization of Un-Vulcanized Natural and Synthetic Rubber
The Effects of Endlinking Network and Entanglement to Stress-Strain Relations and Strain-Induced Crystallization in Un-Vulcanized and Vulcanized Natural Rubber II
Toub, M.
Extrusion of Low Friction and Low Stiction Microstructured Surfaces On Silicone Rubber
Trogden, B.
Walking Into the Future On Rubber
Tucker, D.
Determining Fluoroelastomer Content of Rubbers Using Thermal Degradation and Spectroscopic Methods of Analysis
Tuckner, P.
A Parametric Evaluation of Hardness, Compression Set, and Compression Stress Relaxation On O-Rings and Cylindrical Shapes Over a Range of Sizes
Tunnicliffe, L.
Linear-Viscoelastic Energy Dissipation At the Filler-Matrix Interface in Silica-Rubber Composites
V
Valentin, J. L.
Use of Different Inorganic Activators As Alternative to ZnO in Natural Rubber Vulcanization
van Urk, M.
Keltan® ECO 5470 for Thermoplastic Vulcanizate Application
Vanis, V.
Introducing Nicryl(TM) NBR, a Review of Compounding Nitrile Rubber and the Performance of Their Vulcanizates
Verron, E.
In-Situ Synchrotron Waxd Investigation of the Crystallized Zone At a Fatigue Crack Tip in Natural Rubber
Vogelsong, R.
Introducing Nicryl(TM) NBR, a Review of Compounding Nitrile Rubber and the Performance of Their Vulcanizates
Volokh, K.
New Approach to Modeling Failure In Rubber
W
Waddell, W. H.
Effect of Cured Liner Gauge On Tire Performance
Evaluation of Aged Tires with Innerliners Containing Varying Halobutyl Levels
Walker, M.
Thermal Analytical Techniques Applied to Formula Investigation of Rubber Products
Wampler, W.
A New Way of Thinking about the Fillers Role in Natural Rubber: Improving Hysteresis Through Filler Modifications and Smart Compounding
Wang, L.
SBR/Carbon Nanotube Nanocompsites Using Polystyrene Coated Carbon Nanotubes As A Master Batch
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Wang, N.
Microencapsulated of Ammonium Polyphosphate and Its Flame Retardance with Synergistic MCM-41 Fillers in Natural Rubber
Wang, S. F.
Synthesis of High 1,2-Microstructure POLY(1,3-BUTADIENE) Using a Biobased Lewis Base
Warasitthinon, N.
Study of Parcial Replacing Carbon Nanotubes in Conventionalcarbon BLACK/NBR Nanocomposites
SBR/Carbon Nanotube Nanocompsites Using Polystyrene Coated Carbon Nanotubes As A Master Batch
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Ward, J.
Patent Law Update: How Will the Leahy-Smith America Invents Act Affect Invention Disclosures At Your Company?
Warren, P.
Carbon Footprint Comparison of Aqueous and Solvent Adhesive Systems Used in Rubber to Substrate Bonding
Webb, R.
Determining Fluoroelastomer Content of Rubbers Using Thermal Degradation and Spectroscopic Methods of Analysis
Wei, M.
The Preparation of Multilayer Silicone Rubber Composites and Their Behavior in the Electromagnetic Field
Welker, M. F.
New EPDM Grades with Improved Processing Characteristics for Automotive Weatherseal Applications
White, G. II
Fluorocarbon O-Ring Aging Studies; An Initial Look
Wichhart, D.
Fluorocarbon O-Ring Aging Studies; An Initial Look
Wilson, S.
Sustainable In-Machine Mold Cleaning Using Dry Ice
Wittek, H.
Orientational Effects and Polymer-Filler Interaction in CNT-Rubber Nanocomposites
Wolgamott, L.
The Effects On Resilence Using Dithophosphate Cure Systems with Polybutadiene
X
Xia, Y.
Stochastic Three-Dimensional Numerical Simulations On the Hyperelastic Behavior of Particle Filled Rubbers Under Moderate Finite Deformation
Xie, W.
Alternative Natural Rubber Sources to Hevea Natural Rubber – Quality and Allergenicity
Investigation of the Composition of Guayule Rubber Using High Resolution Size Chromatography
Y
Yang, M.
Bungee Cord Design and Simulation for Field Tests
The Effects On Resilence Using Dithophosphate Cure Systems with Polybutadiene
Yeoh, O. H.
Modeling Rubber Disks Subjected to Small Compressions
Young, K.
Linear-Viscoelastic Energy Dissipation At the Filler-Matrix Interface in Silica-Rubber Composites
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
![[ Visit ACS Rubber Website ]](images/logo.jpg){kind=logo}