Start | Browse by Day | Author Index | Personal Scheduler

Injection Molding-Session B (AM)

Thursday, October 11, 2012: 8:00 AM-10:45 AM
Room 200 (Duke Energy Center)
Chair:
John S. Dick, Alpha Technologies U.S.
8:00 AM
86
An Advanced Alternative to Ethylene Acrylic (AEM) Elastomers for High-Temperature, Oil Resistant Hoses
Joshua R. Kelley, Zeon Chemicals L. P., Louisville, KY
8:30 AM
87
AEM Polymer for Seals and Gaskets with Low Oil Swell and Improved Processing
Edward McBride, DuPont Performance Polymers, Wilmington, DE and Theresa Dobel, Bachelor, of, Science, in, Chemical, Engineering, Technical Service and Development, DuPont Performance Polymers, Stow, OH
9:00 AM
88
CANCELLED: Influence of Manufacturing Parameters On the Properties of Elastomeric Vibration Isolators
Emmanuelle Sommier, Applied Mechanics Department, Ecole Polytechnique de Montreal, Montreal, QC, Canada
9:30 AM
Break
9:45 AM
89
Extrusion of Low Friction and Low Stiction Microstructured Surfaces On Silicone Rubber
Andrew Cannon, Ph.D.1, Mel Toub2 and William King, Ph.D.1, (1)R&D, Hoowaki LLC, Pendleton, SC, (2)Momentive Performance Materials, Waterford, NY
10:15 AM
90
Cure Kinetics and Variable Temperature Analysis Methodologies for Solving Factory Problems
John S. Dick, Marketing Technical Services, Alpha Technologies U.S., Fairlawn, OH and Edward Norton, MTS, Alpha Technologies, Akron, OH

Contact Information

Rubber Division, ACS
rubber@confex.com