Fall 186th Technical Meeting

October 14 - 16, 2014

R. Ray Gehani, The University of Akron, Akron, OH

Narendra Khandekar, Rubber Technology, IIT Kharagpur, Kharagpur, India, Dipak Khastgir, Rubber Technology Center, Indian Institute of Technology Kharagpur, Kharagpur, India, R. Mukhopadhyay Sr., J.K. Tyre and Industries Ltd., Hari Shankar Singhania Elastomer and Tyre Research Institute, Kankroli, Rajsamand Dt., Rajasthan, India and Samar Bandyopadhyay, R & D, Hari Shankar Singhania Elastomer and Tyre Research Institute, Kankroli, Rajsamand Dt., Rajasthan, India

Rui Jian, Department of Plastics Engineering, University of Massachusetts Lowell, Lowell, MA, Minne Xie, Plastics engineering, University Massachusetts of Lowell, Lowell, MA, Carol Barry, Plastics Engineering Dept. at University of Massachusetts at Lowell, Lowell, MA and Joey L. Mead, Center for High-rate Nanomanufacturing, Center for High-rate Nanomanufacturing, Lowell, MA

Minne Xie, Plastics engineering, University Massachusetts of Lowell, Lowell, MA, Rui Jian, Department of Plastics Engineering, University of Massachusetts Lowell, Lowell, MA and Joey L. Mead, Center for High-rate Nanomanufacturing, Center for High-rate Nanomanufacturing, Lowell, MA

Smita Birkar¹, Weilin Peng², Carol M.F. Barry³ and Joey L. Mead³, (1)Plastics Engineering, University of Massachusetts Lowell, Lowell, MA, (2)Platics Engineering Department, Umass Lowell, Lowell, MA, (3)Center for High-rate Nanomanufacturing, Center for High-rate Nanomanufacturing, Lowell, MA

Jatin J. Darve, Rubber Technology, Indian Institute of Technology, Kharagpur, Kharagpur, India, Golok B. Nando, Rubber Technology Centre, Rubber Technology Centre, Indian Institute of Technology Kharagpur, West Bengal, India-721302, Kharagpur, India, Arup K. Chandra, Head, Global, (Raw, Material, and, Compound, Development), Corporate R&D Centre, Apollo Tyres Ltd., Vadodara, India and Vivek Bhandari, Group, Manager, (R&D), Corporate R&D Centre, Apollo Tyres Limited, Vadodara, India

Christophe Cruanes, Florian Lacroix, Gaëlle Berton, Stéphane Meo and Naranayaswami Ranganathan, Cermel, Laboratoire de Mécanique et Rhéologie, Université François Rabelais de Tours, Tours, France

Edward Norton, MTS, Alpha Technologies, Akron, OH and Avraam I. Isayev, Polymer Engineering, University of Akron, The University of Akron, Department of Polymer Engineering, Akron, OH

Shib Shankar Banerjee, Ph.D., Student, Department of Materials Science and Engineering, Indian Institute of Technology, Patna, Patna, India and Anil Bhowmick, Department of Chemistry, Indian Institute of Technology, Patna, Patna, India

M. Selvakumar¹, Saravana Kumar Jaganathan², Santanu Chattopadhyay¹ and Golok B. Nando¹, (1)Rubber Technology Centre, Indian Institute of Technology Kharagpur, Kharagpur, India, (2)IJN-UTM Cardiovascular Engineering Centre, Universiti Teknologi Malaysia, Johor Bahru, Malaysia

Attila Gergely, Polymer Science, The University of Akron, Akron, OH and Judit Puskas, Chemical and Biomolecular Engineering, Polymer Science, The University of Akron, Akron, OH

Kumar Sankaran¹, Golok B. Nando², Santanu Chattopadhyay³, Sujith Nair, M.Tech.⁴, G. Unnikrishnan, M.Tech.⁴ and Sreejesh Arayambath⁵, (1)Rubber Technology centre, Indian Institute of Technology, Kharagpur, India, (2)Rubber Technology Centre, Rubber Technology Centre, Indian Institute of Technology Kharagpur, West Bengal, India-721302, Kharagpur, India, (3)Rubber Technology Centre, Indian Institute of Technology Kharagpur, Kharagpur, India, (4)Ceat Ltd., Ceat Ltd., Vadodara, India, (5)Ceat Ltd., Ceat Tires Limited, Vadodara, India

Ming-Hang Yang, Department of Polymer Science, Department of Polymer Science, The University of Akron, Akron, OH and Gary R. Hamed, Department of Polymer Science, The University of Akron, Akron, OH