Start | Browse by Day | Author Index | Personal Scheduler

Advances in Rubber Processing

Chair:
John S. Dick, Alpha Technologies U.S.
Molecular Structure and Processing Characteristics of a Granular Gas-Phase Metallocene EPDM Rubber
Wenbin Liang, Dow Chemical Company; Soloman Zang, Dow Chemical Company ; Christiano Bette, Dow Europe GMBH ; Rajan Vara, The Dow Chemical Co.
How to Reduce Cure Times without Damaging the Material with Excess Shear
John Mohl , REP Corp ; Tim Graham , REP Corp
Disagglomeration and Processability
Matthew Putman, n/a; Julie Orlando, n/a
New Rapid Method for Testing Thermoplastic Elastomers
John S. Dick, Alpha Technologies U.S.; Henry Pawlowski, Alpha Technologies U.S.
Advanced Rotor Design: The 4 Wing N Rotor
Richard Jorkasky, Kobelco Stewart Bolling, Inc.
Distribution of State of Cure for Multi-Stage Curing Process
Russell L. Warley, Penn State Erie, The Behrend College
Electron Beam Modification of PTFE-EPDM Rubber Composites: Processing, Characterization and Properties
Sohail Khan, Leibniz Institute of Polymer Research; G. Heinrich, Leibniz Institute of Polymer Research; D. Lehman, Leibniz Institute of Polymer Research; D. Gobs, Leibniz Institute of Polymer Research; R. Franke, Leibniz Institute of Polymer Research
Extrusion Profile Geometry Measurement Methods and Case Studies
Dennis Reynolds, Bytewise Measurement Systems
Cure Kinectic Studies of Unfilled and Carbon Black Filled Synthetic Isoprene Rubber
Avraam I. Isayev, Institute of Polymer Engineering; Ximei Sun, Zbouer Inc.
Advances in Structure Measurements of Carbon Black
George Joyce, Columbian Chemicals Company; William Henry, Columbian Chemicals Company; Ricky Magee, Columbian Chemicals Company
Gear Pumps for the Rubber Industry
William M. Murphy, Maag Pump Systems, Inc

Contact Information

ACS Rubber Division
rubber@confex.com
http://www.rubber.org/meetings/fall.htm