190th Technical Meeting

October 11 - 13, 2016

Aditya Jindal¹, Andrew McClain², Bruno Paiva³, Melissa Camassola⁴, Judit E. Puskas¹ and Kolos Molnar⁵, (1)Department of Chemical and Biomolecular Engineering, The University of Akron, Akron, OH, (2)Chemical and Biomolecular, Akron Univeristy, Akron, OH, (3)University Luterana of Brasil (ULBRA), , Rio Grande do Sul, BRAZIL, Canoas, Brazil, (4)University Luterana of Brasil (ULBRA), Canoas, Brazil, (5)Department of Polymer Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary

Eric Britton, Technical Intern, Preferred Compounding, Barberton, OH; Department of Chemical and Biomolecular Engineering, University of Akron, Akron, OH and Milun Dragutinovic, Preferred Compounding, Barberton, OH

Akansha Rathi¹, Marianella Hernández², Wilma K. Dierkes³, J.W.M. Noordermeer³, Cristina Bergmann⁴, Juergen Trimbach⁵ and Anke Blume³, (1)Elastomer Technology and Engineering, University of Twente, Enschede, Netherlands, (2)Novel Aerospace Materials, Delft University of Technology, Delft, Netherlands, (3)Engineering Technology, University of Twente, Enschede, Netherlands, (4)R&D, Hansen & Rosenthal KG, Hamburg, Germany, (5)R&D, Hansen & Rosenthal Group, Hamburg, Germany

Preetom Sarkar, Rubber Technology Centre, Indian Institute of Technology Kharagpur, Kharagpur, India and Professor Anil Bhowmick, Rubber Technology Center, Indian Institute of Technology, Kharagpur, Kharagpur, India

Jiaxi Li, Avraam I. Isayev, Xiaofeng Ren, Dr. and Mark Soucek, Dr., Polymer Engineering, The University of Akron, Akron, OH

Alireza Hosseinmardi¹, Nasim Amiralian¹, Pratheep Kumar Annamalai¹, Lianzhou Wang^1,2 and Darren Martin^1,2, (1)Australian Institute of Bioengineering & Nanotechnology (AIBN), University of Queensland, Brisbane, Australia, (2)School of Chemical Engineering Faculty of Engineering, Architecture and Information Technology, University of Queensland, Brisbane, Australia